NuFlow’s NuCure Cold Cure UV system turns hours into minutes, making lining companies more productive and more profitable. Combining Pro-Kanal’s Double Helix light core technology with NuFlow’s cold cure UV resins has resulted in an evolutionary leap in light curing technology.
What makes NuFlow’s UV-cured lining better?
Double Helix light core assembly
NuFlow’s unique Double Helix CCUV technology ensures light penetrates the entire surface of the liner. The Double Helix design entwines multiple LED light ropes into 3-, 10- and 30-foot CCUV light cores to cure the CCUV resins while creating a redundancy to ensure there are no disruptions during the process. The liners are also available as wyes and tees for lining branch connections, allowing for the full structural rehabilitation of a piping system. As much as 120 feet can be lined in a single push or pull.
The LED light emitters significantly lower thermal emissions and are more efficient than the phosphorus bulbs used in large-diameter light trains. Reducing the thermal emissions is a key factor in eliminating the need for a larger footprint and additional equipment such as high cubic-feet-per-minute ventilation and air drying.
Cold cure resin technology
NuCure CCUV resin offers many advantages over legacy CIPP resins. These resins are shelf stable, allowing the contractor to wet-out on or off site, providing a longer pot life and enabling exceptionally fast UV cure times. CCUV resins cure densely in as little as 10 minutes, drastically reducing installation times and limiting the duration of thermal energy release. The low temperatures and shorter durations mean CCUV liners can be installed within thin-walled plastic pipes, which could not be lined with other CIPP technologies. In addition, the resins have zero VOC, avoiding nuisance odors and resident concerns at the job site.
NuCure GRP Liner Tubes
NuFlow’s NuCure GRP Liner Tubes are engineered for performance. These seamless, radially expandable ECR fiberglass tubes are engineered to conform to bends and size transitions. The ECR glass features corrosion resistance, while the fiberglass reinforcement provides a thin-wall, high-strength structure. The Resin Protection System consists of an integral polyurethane outer coating that offers high thermal stability and a removable inner calibration bladder that helps to contain and evenly distribute the resin. This protects the resin from excessive bleed-out, blowout, washout and emulsification and helps prevent resin slugs.
Precision PIP installation
Utilizing NuFlow’s signature Precision PIP (push- or pull-in-place) installation methods enables NuCure CCUV to achieve reliably accurate placement without any expensive inversion equipment or complex robotics.
New to UV? Not a problem. NuFlow’s certified contractors are trained with apprentice, journeyman and master level courses. The NuFlow team offers on-site and virtual training through its learning management system and true 24/7 job support. NuFlow equipment and liners are backed by a manufacturer’s warranty and include customer support from its North American Equipment Maintenance Center.
800-834-9597 | info@nuflowtechnologies.com | www.nuflowtechnologies.com
