Product News - April 2020

Product News - April 2020

Vacall AllExcavate hydroexcavator
The Vacall AllExcavate hydroexcavator is ideal for excavating soil, rocks and clay around utility lines and foundations. It uses high-pressure jetting action up to 24.5 gpm with up to 3,000 psi to loosen material. A 27-inch Hg and 5,800 cfm vacuum suctions the material and water slurry into the debris tank. The multistage vacuum filtration system has a simplified design to reduce maintenance, extend performance and increase working life. As material is deposited into the debris body, air continues to move through a dual cyclone separator where more material particles and moisture are removed. The filtered air then passes through the blower, silencer and exhaust. All of the AllExcavate models are available with three different vacuum boom tube and hose designs to accommodate customer preference. 800-382-8302;

Milwaukee Tool PACKOUT compact toolbox
Milwaukee Tool has added the PACKOUT compact toolbox to its PACKOUT modular storage system. Featuring a 75-pound weight capacity and quick-adjust dividers, the toolbox allows for internal adjustments to the layout in order to accommodate various job site materials. Constructed with impact-resistant polymers and an IP65-rated weather seal, the compact toolbox is built to withstand harsh job site environments. 800-729-3878;

Sewer Equipment Tempest industrial air mover
The RAMVAC Tempest industrial air mover from Sewer Equipment has an 18-cubic-yard debris box and a 28-inch Hg cfm positive displacement blower through an 8-inch system. The self-discharging filter system provides automatic interval cleaning of the filter house during operation, reducing downtime. The articulating, extendable knuckleboom provides 4.5 feet of extension, with a total working length of 16 feet and 270-degree range of motion. Standard with a fully opening rear door, the Tempest requires only one dump to eliminate all debris within the box. Also standard is a 50-degree dump angle and 50-inch clearance from splash plate to the ground, allowing for easy off-loading of material into roll-off containers. 800-323-1604;

RIDGID StrutSlayr shear head
The RIDGID StrutSlayr strut shear head creates clean, square strut cuts free from chips and burrs with a single pull of the trigger, in five seconds or less. It easily attaches to the RIDGID RP 340 press tool. It has a built-in measuring guide and 13/16-inch, 1 5/8-inch or combo quick-change dies. It’s also TRISTAND mountable. 800-769-7743;

Mi-T-M hot-water mini trailer
The 4,000 psi hot-water mini trailer from Mi-T-M has a compact design that is perfect for remote cleaning jobs and is easy to store when the job is done. The industrial belt-drive pressure washer utilizes a 12-volt Beckett burner to heat water to 210 degrees F. The package comes complete with an insulated dual-lance and trigger gun, including four quick-connect nozzles, and a 50-foot industrial steel wire braided hose. A 10-gallon diesel fuel tank allows for up to eight hours of cleaning. The trailer has a durable, powder-coated steel frame and rear locking storage area. An optional adjustable trailer hitch swings out of the way for ease of storage. 800-553-9053; 


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.