It can be a chore getting access to drains and pipes in remote locations. The K-1500G sectional cable machine from RIDGID travels on a low-profile four-wheeled cart designed for stability against tipovers and fuel spills.
The unit is designed to clean drain and sewer lines from 3 to 10 inches. It is powered by a 6-hp gasoline engine, enabling it to work where electric power is not available. The machine is strong enough to cut through root blockages.
An easy-to-use, instant-acting cable clutch maximizes operator control. Pulling down on the handle causes the cable to spin at 600 rpm. Releasing the handle frees the cable instantly, and an automatic throttle control idles the engine. The machine comes equipped to use 11/4-inch cable to clean 3- to 10-inch lines through 300 feet. The engine drives the cable by way of a 4-speed transmission, allowing the operator to vary the cable spinning speed to fit the application.
The unit offers forward speeds of 333, 425 and 500 rpm, and a reverse speed of 250 rpm. The machine measures 26 inches wide, wheel to wheel. It is 28 inches long including kickstand and measures 38 inches from the ground to the top of the handle, and 49 inches from the back of the handle to the front.
Standard equipment on the machine includes 10 sections of cable totaling 150 feet, three cable carriers, toolbox, heavy-duty straight and funnel augers, retrieving auger, grease cutter, sawtooth cutter, and sharktooth cutter. For more infor-mation: 800/474-3443; www.ridgid.com; Expo booth 7115.
