Staying Safe on a CIPP Installation Site

CIPP is a popular pipe rehab method, but it poses risks to workers. Learn how to work safely on an installation site.

This content is sponsored by Pipeline Renewal Technologies. Sponsored content is authorized by the client and does not necessarily reflect the views of COLE Publishing. View our privacy policy.
Staying Safe on a CIPP Installation Site

Interested in Relining/Rehab?

Get Relining/Rehab articles, news and videos right in your inbox! Sign up now.

Relining/Rehab + Get Alerts

Today, nearly 50% of pipe repairs use cured-in-place pipe. Though it was only invented in the early 1970s, CIPP’s ability to create a durable, corrosion-resistant new pipe without the hassle and danger of dig-and-replace methods made it an immediate success. But, like other construction methods, it comes with some risks. Using the right safety equipment and taking advantage of new, safer technologies limit workers’ exposure to hazards on the job site.

Respirators: The first line of defense

The biggest question in CIPP, and likely the most controversial, is its impact on air quality. When resins are heated with steam or hot water, they produce a compound called styrene. Though it is commonly found in small amounts in many foods, including coffee and peanuts, styrene in higher concentrations (like those found at heat-cured CIPP work sites) may have dangerous effects. Currently, the U.S. Environmental Protection Agencyconsiders styrene a “known carcinogen.” In addition to styrene, the emissions from manholes, historically referred to as steam, have been found to be a “multiphase mixture” of volatile organic compounds, semi volatile organic compounds, partially cured resin, organic vapors and other particulates.

For every worker on a CIPP installation site, regardless of resin makeup or cure method, a respirator is a simple way to limit inhalation of potentially hazardous chemicals. Utilizing a respirator (and blower ventilation when indoors) when working with styrene-producing resin helps protect workers from inhaling potentially hazardous compounds. At heat-cured CIPP installation sites the air quality can vary widely minute by minute, depending on meteorological conditions, environmental conditions and work site activities. In addition, the distance air hazards travel from the job site, along with concentration and reaction with the air, has yet to be fully understood. Respirators should be workers’ first line of defense on all steam or hot water-curing jobs.

Additional PPE

Working with resin also puts workers at risk of skin and airway reactions. Epoxy resins in particular are strong skin irritants. Resin-to-skin contact can result in contact dermatitis, a red, itchy rash. Nitrile gloves and skin barrier cream under standard work gloves can limit the contact your workers have with resin. Epoxy resin also emits VOCs, which can irritate workers’ noses and throats and even cause occupational asthma. Again, a respirator will protect workers from these effects.

Chemical exposure is not the only risk. As with any construction site, there’s a danger of equipment failing or workers making common mistakes. At a CIPP installation site, workers can be cut by equipment, burned by water or steam, hit by falling tools, subject to eye injuries from flying debris, struck by passing traffic, fall from trucks or into manholes, sustain temporary or permanent hearing loss, or suffer any number of minor injuries. Ensuring every worker has adequate personal protection equipment — hardhat, safety glasses, gloves, steel toe boots, hi-vis clothing and hearing protection — minimizes the risk for these injuries.

Technology-based safety improvements to CIPP lining

There are also new technologies that will make CIPP lining safer. First, utilizing a cure monitoring system like PRT’s VeriCure allows workers to stop curing as soon as the liner is complete. The shorter the cure time and the less time workers spend on the job site, the less they may be exposed to these hazards.

Another option is to forego steam and hot water cure methods entirely. UV CIPP relies on ultraviolet radiation to cure liners, so there is no vapor or contaminated water to contend with while curing. Using a styrene-free resin with UV CIPP also ensures that surrounding buildings and passersby are not exposed to potential hazards as well.

Every construction worker knows that a job site is dangerous. Having the right PPE helps protect workers from those dangers, and choosing risk-reducing technology provides workers with a safer work site from the start.

Ensure your CIPP liner is properly cured every time with VeriCure fiber-optic cure verification technology. VeriCure allows you to:

  • Monitor temperature along the full length of the liner
  • Take readings every 30 seconds
  • Maintain accuracy to within ±2 degrees F

Schedule a demo with PRT and learn how you can reduce the risk of a faulty CIPP installation.

Schedule a demo



Visit the Pipeline Renewal Technologies Storefront


Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.