Hoses

All Jetting Technologies Parker Hannifin TOUGHJACKET

Parker Hannifin TOUGHJACKET water blast hoses, distributed by All Jetting Technologies, are designed to eliminate the need for an additional PVC sleeve and reduce the hose weight by up to 16%. This allows for ease of handling, improved productivity and reduced operator fatigue. They have polyurethane jackets, are tested to DIN EN 1829-2 standards and exceed the abrasion resistance and durability of standard PVC-covered assemblies by more than 100%. ColorGard technology means the primary hose jacket is a different color than the abrasion-resistant WJTA-compliant colored outer jacket to provide easy visual identification of abrasion issues, allowing for efficient inspections and reducing unscheduled downtime. 772-286-1218; www.alljetting.com

General Pipe Cleaners stainless steel braid jet hose 

Stainless steel braid jet hose from General Pipe Cleaners slides more easily down 1.5- to 3-inch drainlines. It also navigates tight bends easily, while its Teflon core reduces resistance and improves cleaning power. It’s available in 30-, 50- and 75-foot lengths. It can increase the performance of General’s compact, lightweight JM-1000 Mini-Jet. Clear grease, sand and ice from small lines, sinks and laundry drains with high-pressure, wall-to-wall water spray. For larger lines and longer runs, the powerful JM-1450 Jet-Set electric water jet pulverizes clogs with a 1 1/2 hp, 13 amp sealed motor that drives a 1,500 psi, 1.7 gpm triplex pump. Vibra-pulse helps the hose slide around tight bends in small lines and down long runs. 800-245-6200; www.drainbrain.com

Kuriyama of America Alfagomma Waterblast

Alfagomma Waterblast hydraulic hoses from Kuriyama of America are made with an oil- and water-resistant synthetic rubber tube. The reinforcement is four high-tensile steel spirals, and the cover is oil-, water- and ozone-resistant synthetic rubber. The hose is designed for very high-pressure waterjetting service. The WATERBLAST WB10 Series hose provides 10,000 psi service for I.D. sizes 06, 08, 12 and 16. The WATERBLAST WB15 Series hose provides 16,000 psi for the dash 08 I.D. size and 14,500 psi for the dash 12 I.D. size. The WATERBLAST WB20 hose provides 20,000 psi service for the dash 08 I.D. size. 847-755-0360; www.kuriyama.com

Hose Reels

COXREELS 1125 Series

The 1125 Series from COXREELS is now available with two upgraded swivel options. The medium-pressure (up to 4,000 psi) and high-pressure (up to 5,000 psi) can both be factory installed on the standard 1125 Series. The medium-pressure swivel is precision machined from solid brass and features upgraded wall thickness as well as upgraded seals and backup rings. The high-pressure swivel is machined from high-strength steel and nickel plated for corrosion resistance. This ball bearing swivel features maximum flow and enhanced load-bearing capabilities. 800-269-7335; www.coxreels.com

Hannay Reels 6200 Power Rewind Reel

The 6200 Power Rewind Reel from Hannay Reels is designed to stand up to rigorous waterjetting and blasting applications. With its heavy-duty steel construction, strong spool, sturdy frame and hydraulic motor, this reel offers hose expansion control for I.D. hose widths between 3/4- and 1-inch. Up to 500 feet of hose is supported at 3,000 psi, making it suitable for large jobs. The A-assembly roller on the front of the frame allows for proper storage and easy dispensing on truck or trailer mounts. Optional upgrades include 5,000 psi working pressure, roller assembly, direct drive hydraulic motor rewind and a hose package, allowing for a wide range of customizations to suit every need. 518-797-3791; www.hannay.com

Nozzles

Arthur Products Alpha Kit

Arthur Products designed its Alpha Kit for low-flow, low-pressure systems. Available in 1/8-inch FNPT and 1/4-inch FNPT versions, the jets are drilled to the end user’s exact pressure and flow specifications. Designed for do-it-yourself property owners with low-pressure systems, the kits are highly versatile. Each kit includes a flusher nozzle, a penetrator nozzle, a deicer/degreaser nozzle, a sewer hose (25, 50, or 100 feet), a tip cleaner, a quick disconnect coupling and a carrying case. 800-322-0510; www.arthurproducts.com

Envirosight Jetscan 

The Jetscan HD video nozzle from Envirosight is an easy way to see what you’re jetting. The system streams video footage straight to a tablet after removal from a manhole. An app-based interface makes it easy to view and annotate footage then upload to WinCan, where you can enjoy effortless sharing, analysis and storage in the cloud. Two interchangeable sleds allow for deployment in lines 6 to 24 inches in diameter. The system’s welded stainless steel construction is built to withstand abuse inside dirty and damaged lines, and a sealed, pressurized design protects the camera components from the elements. It provides a simple solution to assess pipe condition and confirm cleaning success, eliminating wasted resources and guesswork. 866-567-8316; www.envirosight.com

Enz USA UC Line

The UC Line with CrossJet Technology from Enz USA offers a complete line of high-pressure solutions for tough industrial cleaning projects. The nozzles are suitable for cleaning tubes such as heat exchangers in nuclear power plants or in the sugar industry. This CrossJet Technology offers ideal cleaning performance with lower leakage and long durability. The nozzles are available up to 22,000 psi. They are available in 9, 13, 18, 22 and 28 mm sizes. 877-369-8721; www.enz.com

Hydra-Flex Aqua-Rocket

The Aqua-Rocket from Hydra-Flex is a heavy-duty nozzle built to wash away the toughest commercial and industrial cleaning challenges. Constructed with a stainless steel housing and tungsten carbide wear surfaces, it can withstand harsh environments and provide a long lifespan. Thanks to the tungsten carbide tip, it can start and stop both vertically and horizontally. It includes a high-temperature, drop-resistant rubber cover and blasts a concentrated 0-degree water stream that ranges between 750 and 5,600 psi. Its powerful 22-degree cone-shaped, rotating spray pattern creates an impingement force strong enough to take on graffiti, heavy equipment, car washes, livestock barns, peanut broilers and everything in between. It was designed to be repairable — not replaceable — and repair kits extend the nozzle’s life and have you back up and running in only 10 minutes. 952-808-3640; www.hydraflexinc.com

NozzTeq SWEAGLE

The SWEAGLE nozzle from NozzTeq is ideal for removing a lot of material in sewer and storm pipes at the lowest working pressure. In pipes with higher water level, the ejectors create an extreme negative pressure, utilizing water in the pipe in combination with the water supplied from the jetting truck. The result is close to a doubling of the volume of water cleaning the pipe. It is compatible with all jetting trucks on the market, and can be used with clean or recycled water. It works efficiently in both water-filled and dry pipes. 866-350-0624; www.nozztequsa.com

Root Rat cutting nozzle

Root Rat cutting nozzles are used with jetters from 11 hp to large truck-mounted models. The cutters are made of hardened stainless steel and come with a toolbox with two interchangeable rotors — one with cables and the other with chains. The combination kit includes extra chain, cable and bearings. They need no repair or rebuilding other than bearing replacement, which can be completed in less than two minutes for under $10 in parts. 800-288-7873; www.rootrat.net

SewerProShop Raven

The Raven hydroexcavation nozzle from SewerProShop has been precision engineered by Intersewer and manufactured to the highest technical standards of ISO 9001:2008 certification in Germany. The weight counteracts the high-pressure kickback of the wand. It is constructed from high-grade stainless steel, is threaded and includes a replaceable ceramic nozzle insert with forward water jet angled at zero degrees or a fan jet. It is rated for 18 gpm at 4,000 psi up to 80 gpm at 2,500 psi. It includes a 1/2- to 1-inch sewer hose connection. It is operator-friendly with no maintenance required. 877-864-9394; www.sewerproshop.com

USB-USA Gator and Mini Gator

High-performance Gator and Mini Gator nozzles from USB-USA cut and remove roots, grease, blockages and scale in various pipes ranging from 2 to 20 inches. Encased in a compact stainless steel body, the strong reinforced internal design rotates the head. 3D fluid mechanics in the head smoothly direct all the incoming high-pressure water to the four rotating jets in the rear of the head and one in front. These rotating jets create a powerful 360-degree all-around complete cleaning of the pipe, flushing and removing debris in fewer passes. The offset front jet eliminates blockages easily and effectively. The Gator is capable of being used on hose between 3/4 and 1 1/4 inches, while the Mini Gator nozzle can be used on 3/8- to 1/2-inch hose. Also available are case kits that include an additional skid to centralize the nozzle in larger pipe. 844-285-5770; www.usb-usa.com

Warthog Nozzles by StoneAge WT-1/2  

The WT-1/2 nozzle from Warthog Nozzles by StoneAge has a 1/2-inch inlet option and an R24 head engineered to increase the flow range up to 21 gpm. This configuration enables maximum use of higher-flow pumps for more powerful cleaning, while maintaining the small form factor of the WT for navigating pipe bends, according to the maker. The high-flow capacity paired with the company’s WT 040-R24-C head allows use of full pump power to tackle the toughest jobs and achieve a higher rate of cleaning. The small form factor is optimized for cleaning 3- to 6-inch pipes with elbows. The nozzle’s slow, controlled rotation combined with high flow delivers optimal cleaning power for cutting roots or clearing tough deposits. 866-795-1586; www.warthog-nozzles.com

Portable Jetters

Electric Eel Eel-Jet EJ3000

The Eel-Jet EJ3000 from Electric Eel can clean 2- to 8-inch-diameter lines up to 300 feet. It offers 3,000 psi at 4.7 gpm and a 13 hp overhead valve engine for smooth, quiet running and dependable operation with electric start available. It has a 2-1 gear reduced triplex pump with pulsation for longer life, a 300-foot-capacity hose reel, a heat shield to protect the hose and convenient nozzle storage on the unit. Its steel nozzles penetrate and clean tough clog problems from drainpipe walls with a variety of spray angles. Throttle back control automatically adjusts engine speed. It comes with a low-tone muffler for quiet operation and 12-inch pneumatic tires on a rugged steel base for easy maneuverability. 800-833-1212; www.electriceel.com

Jenny Products Steam Jenny direct-drive cold pressure washers

Jenny Products offers four models of Steam Jenny direct-drive cold pressure washers. Providing a compact, economical alternative to belt-driven models while yielding the professional performance of commercial grade units, all models are designed for maximum durability and portability. The pressure washers are powered by 9 or 13 hp Honda GX Series engines, and all models feature a triplex ceramic plunger pump, which provides years of service while requiring little maintenance. They are available with pressure ratings between 3,000 and 4,000 psi, and flow rates vary between 3 and 4 gpm. Features include thermal pump protection, an unloader valve and a high-pressure relief valve to prevent damage to the pump. To protect the engine, the unit will automatically shut down if low oil levels are detected. Furthermore, the chassis is made with powder-coated, seven-gauge steel. 814-445-3400; www.steamjenny.com

MyTana MV84 

The MV84 jetter from MyTana efficiently cleans and clears 3-to-10-inch lines. It has a robust 800 cc Honda engine that lets the super-duty triplex pump deliver 8 gpm at 4,000 psi. With a dual cart design and remote throttle control, it lets you jet indoors or access hard-to-reach cleanouts. The jetter cart houses the engine, super-duty triplex pump and supply buffer tank. A separate hose cart is connected with a 50-foot jumper hose and has ball valve flow control. It comes fully equipped with 250 feet of 3/8-inch jetter hose. Attach a specialty nozzle and take on roots. It is easy to load, maneuver, maintain and use. 800-328-8170; www.mytana.com

RIDGID KJ-2200 Water Jetter

The RIDGID KJ-2200 Water Jetter propels a highly flexible hose through 1 1/4-to-6-inch lines, blasting through sludge, soap and grease blockages. As users pull the hose back, it power-scrubs the line, flushing debris away, restoring drainlines to their full, free-flowing capacity. A working pressure of 2,200 psi and flow of 2.4 gpm provides fast, effective cleaning of lines. It comes standard with a 6.5 hp recoil-start gasoline engine for quick start and a FV-1 foot valve to make remote or indoor operation simple and convenient. The user controls the jetting action at the drain while leaving the jetter outdoors. Simply guide the hose into the drain while the thrust propels the hose down the line. Activate the pulse action to easily navigate difficult bends and traps. The optional H-30 cart makes for easy job site transport. 800-477-3443; www.ridgid.com

SECON Portable Gas Hydro Jetters

Portable Gas Hydro Jetters from SECON are available from 0 to 4,000 psi and generate 1.5 to 9 gpm. They include electric start, air cooled engines, flat-free tires and an hour meter. Optional propane kits are available. Accessories include different size nozzle kits and hoses and pressure gauges. 702-527-5100; www.seconv.com

Safety Equipment

CrewPlex

CrewPlex is a hands-free communication solution to help crews overcome the challenges of continuous communication in environments where noise, distance, and task complexity can affect safety and productivity. It enables you to connect your entire crew, supervisors and support personnel team with one system. Users can talk and hear each other in real time without delay, voice-triggering or pushing a button. High audio quality provides better communication in all environments, especially on sites where noise levels can exceed 100 dB. Connectivity to two-way radio systems keeps workgroups in touch with a supervisor and extends the communication reach of an entire work crew. 334-321-1400; www.crewcom.com

Truck/Trailer Jetters

American Jetter 58 Series Inferno Burner Hot Jetter

The 58 Series Inferno Burner Hot Jetter from American Jetter offers up to 67% more efficient heat over traditional burners. This super fuel-saving hot water system packs extra cleaning power for grease cutting and deicing. Consistent power comes from a 38 hp EFI Kohler gasoline engine with flows up to 20 gpm and pressure to 5,000 psi. The rear speed control reel provides precise cleaning speeds and easy access to the jet hose with the included hose guide. Low-water shutoff stops the engine if the 220-gallon tank runs low. The optional 1-mile open range wireless remote option features water ON/OFF, engine shutdown and hose reel control. The heavy-duty square tubing trailer has a 2-inch ball coupler and standard electric brakes. 866-944-3569; www.americanjetter.com

Cam Spray 3012H Compact Skid Mount Jetter

The 3012H Compact Skid Mount Jetter from Cam Spray is designed for a high cube van or pickup bed and takes up as little space as possible while providing 12 gpm at 3,000 psi. Features include a Honda iGX800 fuel-injected gasoline engine with oil alert and hour meter, powering a gearbox-driven plunger pump with ceramic plungers, stainless steel valves, pressure gauge and 80-mesh water filter. An unloader valve and secondary pop-off protects the pump. A power pulse feature is used for navigating longer runs and elbows. The 100-gallon tank includes low-water shutoff and a float valve to manage filling the tank. An industrial-coated skid platform and frame offers transferability among vans, trucks and trailers, while mounting flanges and D-rings allow for the machine to be fastened or tied down. The machine measures 52 inches long by 41.5 inches wide by 50 inches tall. 800-648-5011; www.camspray.com

GapVax G7 Jetter 

The G7 Jetter from GapVax is built on a heavy-duty, contractor-grade NATM-certified trailer. Several engine choices, including Cummins diesel, are certified and sized appropriately for the water pump combinations. The unit’s hose reel is hydraulically powered with a direct-drive gearbox and variable-speed control. The hose reel offers a 3-foot (curbside) articulation from center of bearing, 180-degree rotation and a capacity of 800 feet of 3/4-inch jetter hose. The polyethylene plastic water tank is available in 300-, 500-, 600- or 700-gallon capacities. The water pump is center-fed for optimal performance. The controller is interlocked with safety features that will show low fuel levels and low water, and is capable of a complete engine shutdown in an emergency. 888-442-7829; www.gapvax.com

Hi-Vac O’Brien 7000 Series 

O’Brien 7000 Series hydrojetters from Hi-Vac offer flow ranges from 18 to 65 gpm, pressure up to 4,000 psi, and a 700-gallon water capacity, meaning jobs can be completed the first time without costly job site returns. Its powerful engine-pump combination, heavy-duty construction and longer jetting time on a single tank makes it suitable for the toughest jobs. A 190-degree rotating hose reel provides easy access no matter how the trailer is parked. The O’Brien 7000-T Series offers the versatility of the 7000 Series trailer-mounted units custom-mounted to a chassis for the ultimate all-in-one convenience. 800-752-2400; www.obrienmfg.com

HotJet USA HotJet II

The HotJet USA HotJet II trailer-mounted jetter is available with hydraulic hose reels and a 37 hp Vanguard fuel-injected engine. Operating with hot or cold water, it runs at 12 gpm at 4,000 psi, cleaning 2- to 12-inch lines, making it an alternative between small-output and larger-output machines. It arrives turnkey with a 330-gallon water tank, detergent tanks and full power-washing capabilities for cleaning, disinfecting and sanitizing after the job. It includes a hydraulic hose reel, heavy-duty 7,000-pound-rated tandem axle trailer (single axle also available), rear control panel with remote control, two heavy-duty diamond-plate side toolboxes and one front toolbox. 800-624-8186; www.hotjetusa.com

Jetters Northwest Eagle-300/4020-SW-DWR

The 20 gpm, 4,000 psi Eagle-300/4020-SW-DWR trailer-mounted jetter from Jetters Northwest can clean larger lines with its 20 gpm flow-capability and 4,000 psi velocity, yet can easily be adjusted down for jetting smaller sewers or sensitive lines. With up to 600 feet of jetter hose, its DC-powered hose reel sits on a 180-degree swiveling base and operates even if the jetter runs out of fuel. The wireless remote offers safe control of jetting on/off, engines on/off, throttle/pressure up/down and reel-wind. Manual controls are panel-mounted on the swiveling hose reel. Powered by emissions-friendly Kawasaki fuel-injected/liquid-cooled engines, these jetters are built on industrial-duty trailers with brakes for safety and can be towed with a full water tank. Choose between 300- or 600-gallon tank sizes. Twin fender-mounted tool bins allow for significant storage space, and aluminum wheels provide a sharp appearance. Pulsation control helps the jetting nozzle pull through long runs. Four jetting nozzles are provided, and several root/grease nozzles are optional. 877-901-1936; www.jettersnorthwest.com

Mongoose Jetters by Sewer Equipment Model 184

The Mongoose Jetters by Sewer Equipment Model 184 comes with a run-dry pump offering 18 gpm at 4,000 psi, a tubular steel frame, corrosion-resistant prepainted subassemblies, state-of-the-art controls, strong hose reel and high-quality gas engine. It is suitable for drain cleaning and sewer jetting, remote access locations, mainlines up to 12 inches in diameter, and commercial and industrial lines. The trailer unit comes with a water tank capacity of 300 gallons and standard hose reel capacity of 600 feet of 1/2-inch hose. The trailer setup consists of a 6,000-pound-rated single-axle trailer, and the addition of a wireless remote control system makes this equipment a true one-person operation. It is also available as a van pack or truck-mounted unit. 815-835-5566; www.sewerequipment.com

Spartan Tool Warrior

With fiberglass casing to protect and silence the entire machine, Spartan Tool’s Warrior trailer jetter provides 4,000 psi at 18 gpm for the strength to clear almost any line. The 180-degree pivoting hose reel and optional four-function remote control let you handle the tightest spots. With pulsation and a full antifreeze system, it conquers tough clogs in any weather. Its clean finish gives you room to customize it with your company logo and colors, allowing you to easily transform the unit into your company’s mobile billboard, and its 300-gallon towing capacity takes you above and beyond. 800-435-3866; www.spartantool.com

Super Products SuperJet

The SuperJet truck-mounted jetter from Super Products is used to blast debris to clear blockages and maintain sewer lines when vacuuming extraction is not required. It uses a strong and smooth single-piston water pump to create consistently high water pressure. Units come standard with rotationally molded polyethylene water tanks in a modular design to accommodate water capacities ranging from 1,080 to 3,240 gallons. Additionally, they offer convenient standard curbside and street-side fill. The hose reel has 1,000 feet of 1-inch-diameter sewer hose, 200-degree rotation and a digital monitor. This allows operators to work efficiently while positioning themselves out of traffic and away from other hazards. The monitor displays a hose footage counter, offers 20 saved settings for hose reel payout and is designed with LED panel lights to enable readability in a variety of environments. 800-837-9711; www.superproducts.com

Vac-Con VJ Series

The VJ Series of jetters from Vac-Con is designed to provide operators with an economical, portable and powerful system in two configurations. The VJ375 offers a 375-gallon water capacity on a single-axle trailer. The VJ750 boasts 750-gallon water capacity on a tandem-axle trailer. Standard features include Tier 4 diesel engine, cold-weather recirculation and air purge system, hydraulically driven hose reel and a reel-mounted, weatherproof electronic control panel. Units are available in multiple water pump pressure and flow configurations. Optional features include gas engine, wireless remote and an antifreeze tank system for cold-weather use. 904-284-4200; www.vac-con.com

Vacall AllJet

Vacall’s AllJet truck-mounted jetter is an easy-to-operate, efficient sewer root maintenance machine. The hydraulically powered triplex plunger water pump is capable of 87 gpm at 2,000 psi with other power options available. The hose reel telescopes out 54 inches from a retracted position and swivels 200 degrees to properly direct the 600-foot jetting hose. It uses a single-engine PTO design and a 1,600-gallon UV-resistant polyethylene water tank. Operator-friendly features include four locking aluminum tool storage cabinets, a rear-view camera, roll-up doors and a washdown system with options including LED lighting packages, an extendable rear canopy and a heating and insulation package inside the all-aluminum rear compartment. 800-382-8302; www.vacall.com

Vactor Ramjet

The truck-mounted Vactor Ramjet is equipped with a Jet Rodder water pump to effectively break up blockages in sanitary lines and flush out debris. Armed with up to 3,000 gallons of water in a stainless steel tank, it delivers flows up to 100 gpm and 3,000 psi. The water pump is a single-piston, hydraulically driven, dual-acting pump that delivers a jackhammer action water flow, breaking through line blockages and scouring even the toughest caked-on debris from pipe walls. Operators can quickly drive to each job site to solve line problems and tackle regular line maintenance. It can be configured with either a front- or rear-mounted hose reel. 800-508-3381; www.vactor.com

Water Pumps

Cat Pumps 4SP and 4DX Series

Cat Pumps teams 4SP and 4DX Series high-pressure pumps with premium DC electric motors for on-the-go pressure-wash power. The systems can be used in various applications, including portable restroom cleaning, air conditioner fan cleaning, and equipment and surface washdown. The pump and motor assemblies provide up to 3 gpm at pressures from 400 to 1,000 psi and operate on any standard DC source. The auto start/stop control runs the pressure washer only when there is demand, increasing pump and motor life. Convenient, reliable and easy-to-service integrated unloaders accurately set and maintain system pressure while diverting water flow during bypass, reducing the pump and motor load and increasing system life. Crankcase oil is pre-filled, so pumps are ready to use right out of the box. Multiple build-to-order configurations are available to fit a variety of needs. 763-780-5440; www.catpumps.com

Hammelmann pumps

Compact three-, five- and seven-cylinder pumps for industrial cleaning, pressure testing and chemical injection service from Hammelmann have input capabilities up to 1,500 hp. The “Zero Emission Pump” option keeps pumped fluid hermetically sealed within, preventing leakage to atmosphere during operation. They combine a compact integral speed-reduction gear end with vertical configuration that channels oscillating forces directly downward into the base structure, eliminating unwanted lateral oscillations. The integral speed reducer with twin helical gears arranged in a herringbone configuration ensures smooth running and even power transmission without axially loading the bearings. A selection of gear ratios is available to allow the optimal choice of driver. The compact construction eliminates the need for an external gearbox and prevents rotary oscillation. Mechanical efficiency is in excess of 95%. 800-783-4935; www.hammelmann.com