New Vacall AutoValveSystem Option for AllJetVac Models

The Vacall AutoValveSystem option available on AllJetVac models is designed to improve operator efficiency and simplify switching water functions with the press of a button. The AVS all electrical system option allows operators to switch from jetting to washdown or optional tank flush from the AllSmartFlow control panel. No need to open or close manual water valves. This innovation also includes a new electric switch bank for raising or lowering the debris tank and tailgate and turning on or off the tank vibrator or sludge pump to be mounted anywhere on the truck. The Auto Valve System is compatible with front and rear AJV hose reel configurations and works with the belly pack remote control for operation of all functions. 800-382-8302; www.vacall.com/allsmartflow

---

Hydra-Flex Revolution sewer jetting nozzle

Hydra-Flex’s new Revolution by Reaper sewer jetting nozzle features a forceful front rotating stream and powerful back jets to cut and clear the toughest blockages. And it goes a step further than the Reaper with a 360-degree rotating subhead with dual jets that completely clean and descale pipe. The all-in-one tool simultaneously cuts, clears and cleans to work faster and save water and money. The Revolution is built for 6- to 36-inch sewer pipe and can take on the biggest jetting challenges. The nozzle operates between 1,000 and 2,500 psi with a flow range of 40 to 80 gpm. The subhead is designed to maintain consistent speed throughout the nozzle’s life, and a stainless steel centralizer is included to ensure the nozzle stays centered within the pipe. 952-808-3640; www.hydraflexinc.com

---

Vortex IMS UV curing system

Accommodating pipe diameters 6 to 80 inches, Vortex’s IMS UV curing systems deploy an ultraviolet light chain and infrared sensors to capture data every 12 inches to ensure a complete cure and improve installation efficiencies. Vortex’s new EnviroCure UV liner, developed in partnership with Applied Felts, is pre-impregnated with resin and constructed using a corrosion-resistant, styrene barrier sleeve, nonwicking fiberglass to enhance physical strength while delivering a thinner pipe wall design. Its unique construction enables reinstatements to be performed quickly and correctly the first time with reliable dimpling that clearly identifies junctions between laterals and the mainline. Additionally, the liner is cold and hot weather friendly, and is ideal for environmentally-sensitive locations. 855-949-3441; www.vortexcompanies.com

---

Milwaukee Tool MX FUEL cordless pipe threading machine

The new MX FUEL pipe threading machine from Milwaukee Tool harnesses the power of MX FUEL equipment system’s REDLITHIUM batteries to detach operators from power outlets on the job site, allowing threads to be made wherever it’s most convenient. For easy transportation to and around the job site, the pipe threading machine features a collapsible cart built with gas springs to assist the tool up to working height, and the integrated wheels allow for easy transport over uneven surfaces. The machine provides the power to thread up to 2-inch black iron pipe, stainless steel, rigid metal conduit and more. When paired with the included XC406 battery packs, the threading machine allows for all-day runtime, delivering up to 140 cut, reamed and threaded 3/4-inch pipe ends per pack. 800-729-3878; www.milwaukeetool.com 

---

Isuzu Commercial Truck N-Series EV

Isuzu Commercial Truck of America announced its first all-electric production model, the N-Series EV. The 2025-model-year Class 5 truck, featuring a full 19,500-pound gross vehicle weight rating, a battery electric platform developed by Isuzu Motors Limited, and an all-new cab design, will be available in the first half of 2024. The trucks will offer wheelbases ranging from 132.5 to 176 inches to accommodate a variety of body lengths, four choices of battery capacity, the largest of which has a range up to 235 miles, DC fast charging and AC (level 2) charging capability, and an optional Advanced Driver Assistance System package designed to improve driver, passenger and pedestrian safety and to help reduce the number and severity of collisions. Every N-Series EV will be powered by a number of 20 kWH, lithium-ion battery packs, and users will be able to choose from three-, five-, seven, and nine-battery-pack models. 866-441-9638; www.isuzucv.com

---

Hino Trucks Me and Le Series electric medium-duty trucks

Hino Trucks has expanded its product range to include electric vehicles. The electric version of its M- and L- Series medium-duty trucks, branded as Me Series and Le Series, will integrate SEA Electric’s SEA-Drive power system. The Hino Class 5 M5e cab over and Class 6 L6e conventional models come equipped with battery capacities of 138 kWh and 220 kWh respectively. To complement the EV transition, Hino Trucks is building infrastructure to support the electric vehicles with Hino INCLUSEV, a portfolio of end-to-end electric vehicle enablement exclusively available through Hino’s nationwide dealer network. 248-699-9334; www.hino.com

---

Hypertherm Associates nesting software subscriptions

Hypertherm Associates released ProNest LT 2023 version 15.1 nesting software, which is now available on a low-cost subscription basis for the waterjetting market. ProNest LT subscriptions will support virtually any make or model of jetter, making it easy to insert the nesting component into an existing workflow. There are two waterjet subscription tiers to choose from. ProNest LT OMAX is specifically designed for OMAX waterjet machines. It supports conventional, straight cutting for OMAX machine models including OptiMAX, OMAX, MAXIEM and GlobalMAX. ProNest LT Waterjet Plus is a more comprehensive subscription tier, supporting conventional and straight cutting for virtually any waterjet brand, plus plasma and oxy fuel cutting, all in one package. 800-643-0030; www.hypertherm.com