Product News: Nov. 5, 2015

Check out the latest listing of products exclusively for the sewer and drain cleaning and inspection industry.
Product News: Nov. 5, 2015
The Gold Series Six Shooter from Mr. Manhole is an upgrade to the company’s premier manhole cutter, which features enhanced power, speed and durability.

Interested in Relining/Rehab?

Get Relining/Rehab articles, news and videos right in your inbox! Sign up now.

Relining/Rehab + Get Alerts

Mr. Manhole manhole cutter
The Gold Series Six Shooter from Mr. Manhole is an upgrade to the company’s premier manhole cutter, which features enhanced power, speed and durability. Attached to a skid steer, the manhole cutter also features improved cutting surfaces, a heavier frame, Quick Adjust variable cutting diameter that ranges from 28 inches to 72 inches, and custom heavy-duty auger drive. A minimum flow of 30 gpm and 2,500-pound minimum lifting capacity is required. 419/741-9075;

Hilti module diamond core bits
The X-Change module (X-CM) core bits by Hilti can be re-tipped on the job site in just a few minutes using a screwdriver, allowing operators to replace a worn X-CM module with a new module instead of replacing the entire core bit in the event a bit becomes stuck in concrete. All modules are easier to store and transport than complete drill bits and are available in diameters ranging from 2 to 8 inches. 800/879-8000;

COXREELS EZ-Coil safety system
The EZ-Coil safety system from COXREELS was developed exclusively for spring-retractable lines and retracts up to 80 percent slower than conventional reels. It works uni-directionally without any increase to the amount of resistance when pulling out the hose, cord, or cable. When engaged upon recoil, this safety system controls the aggressive spring motor energy resulting in a reel that retracts at a safe and steady pace, enhancing operator safety. 800/269-7335;

ICS pipe cutter
The 680PG-10 PowerGrit Utility Saw from ICS, a Blount International Brand, is a pipe cutter designed to cut plastic pipe to ductile iron pipe up to 10 inches in diameter. The new 680ES engine platform features a 76.5 cc, 5 hp engine and a direct-drive clutch, so the drive belt doesn’t slip in wet conditions, unlike most circular cut-off saws. 800/321-1240;

Water Cannon jetter trailer
The 16T52, two-wheel commercial jetter trailer from Water Cannon has 500-foot by 3/8-inch hose reel capacity, 200-gallon water tank with float valve, polyurethane tool box, lights, front jack with wheel, safety chains and aluminum fenders. The commercial high-pressure jetter has a Vanguard 18 hp electric-start engine with 15-gallon fuel tank, TS Series General triplex plunger pump (5.5 gpm, 3,500 psi), 8-foot jumper hoses and three jetter nozzles (penetrator, flusher and degreaser/deicer). 800/333-9274;

U-TECK temporary manhole covers
Safe-T Lid temporary covers from U-TECK provide fall-in protection while the manhole or hand-hole lid is removed. Made from high-impact resistant composite, the lids support 400 pounds of direct weight. Openings along the edge accommodate cables, ducts or hoses. Hand openings allow for easy transport, placement and removal. 800/542-7011;

Electric Eel pipeline inspection camera 
The ACE 2 pipeline inspection camera system from Electric Eel Mfg. Co. features one-touch USB recording, on-screen footage counter, wheel kit for easy transport and heavy-duty screen cover. The inspection system has a stainless-steel-housed 1.68-inch-diameter color camera with sapphire lens, 20 LED light ring and high-resolution CCD element (optional self-leveling color camera), 200 feet of Kevlar braided 1/2-inch-diameter pushrod, 512 Hz sonde, and 5.4-inch LCD monitor with AR film for optimal viewing in sunlight. 800/833-1212;

Goulds end suction centrifugal pump
The 316L stainless steel end suction centrifugal pump from Goulds Water Technology, a Xylem brand, is designed for water circulation, booster service, spray system, washing/cleaning system, air scrubbers and general water services. The pumps can be mounted horizontally or vertically. The standard NEMA single- or three-phase motors are made for continuous duty under all conditions. 866/325-4210;

Bayco LED work lights
The SL-1500 Series LED work lights from Bayco Products are constructed with a rear multi-fin heat sink that keeps the fixtures cool to the touch. Each single fixture work light produces 2,200 lumens of light. The SL-1522 has dual light fixtures for a combined output of 4,400 lumens. Fixtures can be tilted or swiveled independently allowing the user to position the fixture where light is needed. 800/233-2155;


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.