PTC Waterblasting Systems H Series pumps
H Series pumps from PTC Waterblasting Systems are rated to 40,000 psi and 550 hp, and can be mounted in either a vertical or horizontal position. They feature integrated gear reduction for compact configuration and allow for 10K to 20K convertability by changing only the plunger kits. Also standard is the pneumatic pressure regulator, available in both 0-20K and 0-40K configurations to accommodate a wide range of either dry-shutoff or dump-style tools. 330/708-1444; www.ptcitaliana.com.

Super Products SuperJet truck-mounted jetter
The SuperJet truck-mounted jetter from Super Products has a double-acting, single-piston, hydraulically powered water pump offering 1-1 oil to water ratio and rated design capacity of 100 gpm and 3,000 psi continuous duty. Its modular water tank setup accomodates capacities from 1,000 to 3,200 gallons. It has a rear compartment heated by an 80,000 Btu/hr heater that enables year-round operation in freezing environments. The control panel performs a number of functions including adjusting engine throttle with water pressure speed dial; on/off water pump PTO; psi and gpm; and hose reel joystick, pay-in/pay-out with speed control. 800/837-9711; www.superproductsllc.com.

Fernco coupling sizing app
Fernco’s app for Apple and Android phones is an alternative to searching through the catalog or looking through coupling charts to find the correct coupling size. Users enter brief information about the application and the app’s product selector will populate the correct Fernco couplings to use and provide additional information on the product. Optionally, outside diameter or nominal pipe information can be entered and the app can be used on any job site with or without Wi-Fi. Users can select favorite products to return to at a later date when needed. 810/653-9626; www.fernco.com.

Trelleborg Resin Calculator tool
The Resin Calculator from Trelleborg calculates the precise amount of resin and hardener needed to build a leak-free network of pipes. It provides the exact volume and weight of material required and can be used to determine amounts for CIPP lining. Users input material parameters such as liner type, type of resin system used, pipe diameter, wall thickness, length of liner and preferred unit of measurement. Then the online tool calculates the amounts of resin and hardener mix required in volumetric and gravimetric sizes. 800/626-2180; www.trelleborg.com/pipe-seals.

Picote Smart Spider PVC pipe cleaner
Picote’s Smart Spider cleans all types of pipes and is safe to use in PVC pipes. The unit is designed for pipes where the invert or other pipe sections are missing, and navigates around 90-degree bends. It is available for use in pipe diameters of 4, 6 and 8 inches. The Smart Spider is connected to the miller machine shaft using a sleeve bearing, and, once attached, rotates clockwise to clean the pipe at a maximum of 1,000 rpm. 219/440-1404; www.picotesolutions.com.

Milwaukee copper tubing cutters
The 3/4-inch Mini Copper Tubing Cutter from Milwaukee Electric Tool features a reinforced adjustment mechanism and is engineered to have a longer life than previous models. The 1-inch Constant Swing Copper Tubing Cutter has a four-roller design that prevents walking. Both units have chrome rollers that provide rust protection, and a tool-free blade change assembly. 800/729-3878; www.milwaukeetool.com.