Product News: January 2019

Browse the latest products exclusively for the sewer and drain cleaning and inspection industry

Product News: January 2019

The Platinum Series Six Shooter manhole cutter from Mr. Manhole is designed to make every aspect of the cutting, removal and repair process smarter, faster and safer for crews.

Mr. Manhole Platinum Series Six Shooter
The Platinum Series Six Shooter manhole cutter from Mr. Manhole is designed to make every aspect of the cutting, removal and repair process smarter, faster and safer for crews. It has a heavier mainframe, new Easy-Drive system, and a larger cutting depth and diameter so it is able to complete high-volume repairs quickly and easily. The Six Shooter cuts diameters up to 72 inches and cuts 16 inches or 20 inches deep with optional blades. In addition to manhole frames, it can also cut out water valves and make road penetrations to repair utilities using the optional Cookie Cutter package. Tie-down points on each arm make securing for transport easy and fast. 419-741-9075; www.mrmanhole.com.

Water Cannon Inc. - MWBE electric clutch series of pressure washers
The heavy-duty, 12-volt electric clutch series of pressure washers from Water Cannon Inc. - MWBE are designed to mount on the front of a diesel engine for high-pressure washing on location. It is available in three different pressures from 2,000 to 4,000 psi and flow rates from 4 to 8 gpm. Other features include a continuous-duty hydraulic coupling drive system, an in-line serviceable stainless steel mesh water filter, stainless steel unitized valves, forged brass manifold and a heavy-duty triplex plunger pump. The thermo-pump protector engages at 140 degrees F and the adjustable pressure regulator is from 150 psi to the max pressure. 800-333-9274; www.watercannon.com.

Perma-Liner Industries Vinyl Hybrid Resin
The Vinyl Hybrid Resin from Perma-Liner Industries is a hybrid vinyl ester with high-rigid polymer backbone, designed with zero styrene and low VOCs. The resin has a standard pot life of more than eight hours and uses an easy initiator with 1 percent cumyl hydroperoxide by weight, making it cheap, easy and effective. It can be steam or hot-water cured at a minimum of 140 degrees F held for 28 minutes, with no post cure. The lower cure temperature means it is gentler on equipment and it is an easier temperature to reach for longer shots. The resin has consistent viscosity and is resistant to sag and draining around the vertical surfaces and reinforcement. 888-336-2568; www.perma-liner.com.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.