5 Tips for Accident-Free Vacuum Excavation

Safe digging, regardless of the method, begins and ends with a focus on operator safety.
5 Tips for Accident-Free Vacuum Excavation
Proper safety gear is a must for hydroexcavation. Without it, you’re putting yourself and your company at risk.

Interested in Safety?

Get Safety articles, news and videos right in your inbox! Sign up now.

Safety + Get Alerts

Vacuum excavation is the process of excavating and removing soil using high-powered vacuum suction, which transfers material to a debris tank. Water and air are often used to break up soil and expose underground utilities. Vacuum excavation is a less destructive and more accurate way to excavate soil and locate underground utilities.

Hydroexcavation equipment, which combines high-pressure water, compressed air and vacuum, can be complex. The process and equipment are very safe, but it is critical that the operators are competent and are properly trained to use the equipment. A comprehensive training program should follow a manufacturer’s recommended operating procedures, industry standards, and safety policies and procedures of a company or utility.

Vacuum excavation has many applications, including utility locating or potholing; digging assistance near active utilities; installation of road signs, posts or footings; and many others. If an operator will be exposing existing utilities, it’s critical they understand best practices for damage prevention and underground utility construction methods. This lets the operator perform the work, recognize hazards and manage risks to themselves and the public, along with minimizing utility damage during excavation.

After you’ve established traffic control and site safety plans, and vacuum excavation work begins, use these tips to maintain a safe work site:

  1. Use a one-call center to mark all underground utilities so you can excavate a precise hole and anticipate hazards as you progress through the ground.
  2. Use proper personal protective equipment as determined by your company or utility safety policy. This usually includes rubber steel-toe boots, safety glasses, face shield, hard hat, gloves, hearing protection and rain suit. Protect those in the immediate area by explaining site hazards. Set up a safety perimeter with limited access and consider a splashguard when starting the hole.
  3. As you excavate, don’t stand near a hole as it gets larger and deeper. Cave-ins are possible at this point, so protect yourself and those nearby.
  4. If you are using pressurized water or air be careful not to use more pressure than necessary so you don’t damage existing utilities. A high-pressure water gun at 4,000 to 5,000 psi can easily cut a power cable.
  5. Don’t leave large rocks hanging inside the hole because they could fall onto and damage exposed utilities. Remove large rocks as you excavate or lower them to the bottom of the hole and leave them there at the end of the job.

Vacuum excavation is used worldwide and has quickly grown into the best method of damage protection and standard construction practice in the United States. The process will continue to grow through proper use and safe application. Work smart. Work safe.


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.