Product News - September 2013

Product News - September 2013
Condux Y-Block cable installer

Interested in Relining/Rehab?

Get Relining/Rehab articles, news and videos right in your inbox! Sign up now.

Relining/Rehab + Get Alerts

Pipeline Renewal lateral cutter

The Micro Premium lateral cutter from Pipeline Renewal Technologies can make cuts 100 feet inside pipe 3 to 6 inches in diameter (up to 10 inches available). An illuminated camera with digital monitor/recorder and configured water/air cleaning delivers real-time cutting footage, while a pressure alarm warns against water ingress. The system travels on a wheeled chassis, accepts interchangeable cutting heads and can be field maintained. 866/936-8476;

NLB 1,000 hp convertible water jetter

The 1005 Series 1,000-hp convertible water jetter from NLB Corp. delivers from 4,000 to 20,000 psi. The two-model series can be converted to five operating pressures and flows, up to 333 gpm. The diesel-powered units have a slow-running quintuplex plunger pump and internal gearing that eliminates the need for large pulleys or belts. Features include a forged steel crankshaft in heavy-duty mounted bearings and drive pinion output shafts on both sides of the pump to accommodate opposite-hand drive. All operating controls are mounted on a separate accessory manifold for extra protection. 800/441-5059;

Rhino Linings polyurea coating

The SolarMax 11-70 pure polyurea aliphatic coating from Rhino Linings Corp. is UV and color stable and resistant to humidity and substrate moisture during application. The 100 percent solids (no VOCs) high-pressure, spray-applied coating protects steel, concrete, geotextile, foam, wood or aged polyester fiberglass. 800/422-2603;

General Pipe Cleaners Typhoon trailer jet

The JM-2512 Typhoon trailer jet from General Pipe Cleaners delivers 12 gpm at 2,500 psi to clear grease, sediment and debris. The trailer jet has a 200-gallon holding tank, electric brakes, safety strobe light, safety cones, rear fold-down stabilizer jacks, retractable hose guide arm and antifreeze system. The unit is powered by a 24-hp Honda engine with a 10-gallon fuel tank. 800/245-6200;

Trelleborg DBM clamp

The distributed buoyancy module (DBM) clamp from Trelleborg has a universal interface for use on all riser types, and features aramid filters instead of a fabricated titanium strap. 800/626-2180;

PipeHunter Red Dawg nozzle

The Red Dawg nozzle from PipeHunter is designed for heavy debris cleaning. Made from 4140 hardened carbon steel, the 5.5-pound nozzle has optimized jets for 3/4- and 1-inch flows with optional forward plug or jet. Other features include six flow-straightened and replaceable 15-degree angled pulling jets. 800/373-1318;

Coxreels 1185 high-pressure series

Large capacity, 1185 Series high-pressure hose reels from Coxreels, featuring 1 1/2-inch I.D. models, are designed for up to 3,000 psi. The reels have an electroless nickel-plated steel 90-degree full-flow NPT swivel inlet and chemical-resistant AFLAS seals for high-pressure applications. Models are available with a solid steel direct hand crank or chain and sprocket retraction. 800/269-7335;

Source 1 cured-in-place point repair system

The PipePatch cured-in-place point repair system from Source 1 Environmental consists of components tested and listed to NSF 14 and NSF SE 10990 with 100 percent fiberglass liner material. 810/412-4740;

Water Cannon pressure washer pump

The Cat 67DX series pressure washer pump from Water Cannon is an enhanced version of the 4,200 psi triplex pump. Features include an adjustable unloading bypass system, chemical soap injectors, inlet adaptor with stainless steel filter washer and thermal relief overheat sensor. 800/333-9274;

Metabo lightweight angle grinders

W720 and W820 lightweight angle grinders from Metabo Corp. are made for cutting, grinding and deburring. The W720 weighs 4.4 pounds and has a maximum wheel diameter of 4.5 inches. Features include a 6.5 amp motor with 720 watts of power, 14 in-lbs of torque and no-load speed of 11,000 rpm. The W820 weighs 4.7 pounds and has a maximum wheel diameter of 5 inches. It has a 7.5 amp motor with 820 watts of power, 16 in-lbs of torque and no-load speed of 10,000 rpm. 800/638-2264;

Navman driver behavior tracking

The OnlineAVL2 fleet tracking with driver behavior feature from Navman Wireless USA enables fleet operators to identify drivers who are compromising safety and fuel efficiency. The system offers four reports and two dashboard KPIs that pinpoint trouble spots while allowing drilldown to a specific driver directly from the Dynamic Dashboard, regardless of fleet size. 866/527-9896;

Nortech pneumatic vacuums

ATEX-approved pneumatic vacuums for hazardous locations from Nortech Vacuum Products, a division of Guardair Corporation, eliminate the threat of static electricity by combining static conductive design with pneumatic technology. The vacuums are approved for use in Class 1, Group A, B, C and D; and Class II, Groups E, F and G; as well as ATEX zones 1, 2, 21 and 22. The vacuums run off compressed air and are available in 30- and 55-gallon drum units. 800/482-7324;

US Fleet Tracking weather overlay

The weather overlay from US Fleet Tracking, standard with the company’s live GPS tracking service, provides a comprehensive view of weather in any desired area and works with any Web-based system, including hand-held devices and smartphones. 405/749-1105;

Knipex retaining ring pliers

Retaining ring pliers from Knipex Tools L.P. are available in several variations for use on a range of ring sizes and styles. The pliers are made for continuous use and feature high-density spring steel tips inserted into the forged body for strength and longevity. Pliers are available in internal and external styles; straight or 90-degree angles. 847/398-8520;

Condux Y-Block cable installer

The Y-Block cable installer from Condux International is designed for installing micro duct or fiber optic cable into an existing occupied duct. It can be coupled with a fiber optic blower for easier installation. The Y-Block can accommodate duct sizes from 1.315 to 2.375 inches O.D. with cable seals ranging from 0.35 to 0.90 inches O.D. 800/533-2077;

Reelcraft side-mounted hose reels

Series RT side-mounted hose reels from Reelcraft Industries accommodates up to 50 feet of 3/8-inch O.D. hose. The stainless torsion spring and latch are mounted on the arm for ease of access and to eliminate the possibility of latch-out at full extension. 800/444-3134;


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.