RIDGID Levels, Tape Measures

Aluminum machined levels and locking steel tape measures from RIDGID are the latest additions to its line of hand tools. The four levels (4-Vial Aluminum Machined Torpedo, model 400UM; 5-Vial Aluminum Machined Torpedo Level, model 500UM; 5-Vial Aluminum Machined Laser Level, model 800LMI; and U-Shape, V-Grove 10-Function Aluminum Machined Level, model F-10) are built from a solid block of aluminum and come with v-grooved Earth magnets for stability on pipe or magnetic surfaces. The laser level is tested to last up to 10,000 hours and provides accuracy of ¼ inch at 100 feet. The tape measures are available in 16-foot (model 616) or 25-foot (model 325) versions. 800/769-7743; www.ridgid.com.

General Pipe Waterjet Drain Cleaner

The JM-3055 Jet Set waterjet drain cleaning machine from General Pipe Cleaners delivers 3,000 psi and 5.5 gpm for cleaning stubborn stoppages, including grease, sand and ice. The unit has a 300-foot capacity hose reel, tubular frame, four pneumatic tires and wheel brake. Other features include 16 hp Briggs and Stratton Vanguard electric-start engine, 2:1 gear reducer and triplex pump. Vibra-pulse on demand helps the hose slide down long runs and around tight bends. Safety features include thermal relief valve, backflow check valve and inlet filter. A toolbox, spray wand and chemical injector are included. 800/245-6200; www.drainbrain.com.

GP HydraFlow Drop Boxes

Standard and Space Saver drop boxes from GP HydraFlow LLC are available for 8- to 24-inch outlets with custom sizes available. Configured to discharge wastewater along the interior wall of the lift station, the drop boxes move solids, while reducing their tendency to separate from the water and collect at the surface. Built with T304 stainless steel, the boxes fit any lift station or manhole. 317/403-2700; www.gphydraflow.com.

Presto Lifts Hand Pallet Trucks

Rol-Lift hand pallet trucks from Presto Lifts Inc. have a lift capacity of 4,500 to 6,500 pounds and fork length from 48 to 72 inches. Standard and heavy duty models are available in 20.5- and 27-inch widths. 800/343-9322; www.prestolifts.com.

Subsurface Supply Industrial Vacuum System

The IVAC PV500 sand, sump, rock, slurry and water handling industrial vacuum system from Subsurface Supply Inc. is capable of moving materials in industrial and environmental cleanups. The skid-mounted unit weighs 1,800 pounds, is 72 inches long, 36 inches wide and 74 inches high. The system delivers up to 100 psi, 500 cfm and 24 inches Hg. Discharge pressure is fully adjustable (1-100 psi). It has a vertical vacuum lift up to 150 feet, vertical discharge up to 500 feet and horizontal discharge up to 10,000 feet. The control panel can be powered by a 12-volt DC or 120-volt AC source. An intrinsically SAFE option is available for hazardous environments. 605/838-8384; www.subsurfacesupply.com.

Knaack Weather Guard Ladder Rack System

The Weather Guard Quick Clamp Ladder Rack and Nissan NV Ladder Rack from Knaack LLC are designed for commercial vans and minivans. Quick Clamp features include extended and outward angled ladder hooks on the front end of the side rails for easier loading in tight spaces, 3/16-inch extruded aluminum rails, stainless steel gutter clamps, anti-wear protection and adjustable sway braces for easy ladder change out. The NV ladder rack features the EZ-Glide system that enables one person to load or unload ladders through the use of an ergonomic drive arm. 800/456-7865; www.knaack.com.

Honda Industrial Series Generator

The EB1000 industrial series generator from Honda has a maximum output of 10,000 watts, narrow-shaped design and centralized exhaust. The generator operates at 72 decibels at 23 feet. The digital auto voltage regulator (DAVR) holds voltage stable within one percent during standard operation. The i-Monitor digital operation system offers at a glance total used hours, generating voltage (when error detected), battery condition, Oil Alert and AVR (auto voltage regulator) error code. 770/497-6400; www.hondapowerequipment.com.

Reed Manufacturing Rapid Cut, Bevel Machine

The rapid cut and bevel machine from Reed Manufacturing Co. cut and bevel up to 24-inch PVC or PE pipe in one pass. The pneumatic-powered machines are portable to the jobsite and are designed for use above ground, in water or in trenches. 800/66-3691; www.reedmfgco.com.

Clear Computing Cloud-Based TAC

Cloud-based TAC online operations management system from Clear Computing enables users to choose the number of accounts needed, with pricing on a per-user basis and month-to-month subscriptions. The system is designed for businesses with multiple locations, owner operators who run their business from home, office and vehicle, seasonal variations and outside sales. 888/332-5327; www.clearcomputing.com.

Hannay PW-2 series reels

PW-2 series reels from Hannay Reels are designed to mount to most pressure washers. Made of 12- and 14-gauge steel with black powder-coat finish, the reels have a pressure rating of up to 4,000 psi. Features include adjustable split bearing brake assembly and permanent attached direct crank rewind. 877/467-3357; www.hannay.com.