The JM-3080 Jet-Set from General Pipe Cleaners gives you the increased cleaning power of 8 gallons of flow per minute without compromising your pump.

General Pipe Cleaners’ powerful JM-3080 Jet-Set water jet drain cleaning machine clears stubborn grease stoppages as well as lines clogged with sand, sludge and ice. This machine gives the operator the increased cleaning power of 8 gpm without risking pump damage if the water supply can’t match the pump demand. 

A 12-gallon buffer tank mounted on its hefty 1 1/4-inch tubular frame gives the safety margin needed to use this high-flow jet on larger more difficult lines. The tank extends the operating time as well. A low-water shut-off valve protects the pump until the tank has been refilled. 

The 20 hp Honda engine with electric start drives a 3,000 psi/8 gpm pump through a 2-to-1 gear reducer. The pump features Vibra-Pulse on demand, to help the hose on long runs and around tight bends. A Cart Reel option allows the operator to use the higher power of the gas machine on remote or indoor applications. 

Related: General’s Jet-Set Water Jets Clear Grease, Sand and Ice

Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a backflow check valve and inlet filter. The JM-3080 comes complete with a toolbox, chemical injector and spray wand. 

For details, call the Drain Brains at General Pipe Cleaners at 800/245-6200, or visit

General Pipe Cleaners, a division of General Wire Spring Co., is a manufacturer of high-quality drain cleaning equipment since 1930. General serves drain cleaning professionals and plumbing contractors, as well as facilities managers, the rental industry and the hardware/home center market. The Toughest Tools Down The Line.

Related: Tough Clogs Are No Match for the Typhoon Trailer Jet

Related Stories

Like this story? Sign up for alerts!