Vac-Con gasoline auxiliary engine  

The gasoline auxiliary engine option from Vac-Con is a less expensive, lighter weight and quieter alternative to a Tier 4 diesel engine in the company’s two-engine combination machine. The Ford V10 gasoline engine meets horsepower requirements for all water systems, delivering from 30 gpm to 120 gpm and up to 3,000 psi, yet weighs less than a comparable diesel engine. It also can be modified to run on compressed natural gas (CNG). 888/491-5762; www.vac-con.com.

Honda GXR120 rammer engine

The GXR120 general purpose engine from Honda is designed for equipment used to compact soil or other granular material. Capable of meeting the high demands that rammers require, the engine has a displacement of 121 cc and can power 110- to 175-pound rammers at multiple attitudes. The cast-iron cylinder sleeve and carbon-steel, dual ball bearing crankshaft provide improved engine strength for rammer applications. 678/339-2600; www.powerequipment.honda.com.

KNIPEX Tools X-Cut pliers  

The X-Cut pliers from KNIPEX Tools is a compact, box-joint diagonal cutter. The box-joint design adds stability and eliminates backlash, while the slim shape provides access in confined areas. The pliers cut through fine strands similar to hard piano wire as well as multi-strand cable. 847/398-8520; www.knipex-tools.com.

Hi-Vac O’Brien 7000-T hydrojetter  

The O’Brien 7000-T hydrojetter from Hi-Vac Corp. is designed for truck-mounted applications. Features include flow ranges of 18 to 65 gpm, 2,000 to 4,000 psi, 700-gallon polyethylene water tanks, triplex pump and hydraulic driven reel with variable-speed control. The hydrojetter is powered by a water-cooled diesel engine with 17-gallon fuel tank. 800/752-2400; www.obrienmfg.com.

LMK self-driven pipe renovation system  

The Schwalm robotic pipe renovation system from LMK Technologies is compatible with sewer pipeline inspection camera systems and can cut, grind and chisel the full circumference of 5.5- to 24-inch-diameter pipe. It can remotely disconnect lining equipment, enabling the robot to install another liner while the first liner is curing. Equipped with an interchangeable digital zoom camera, the robot can reach 12 inches into a service connection to remove resin slugs, as well as cut and drive through a failed CIPP installation. It also can reinstate service connections post CIPP. 888/433-1275; www.lmktechnologies.com.

Vanair rotary screw air compressor

The Viper diesel 80 cfm at 100 psi rotary screw air compressor from Vanair Manufacturing is designed to operate 90-pound jackhammers, as well as 1 1/2-inch impact wrenches and piercing tools. Powered by a Tier 4 certified Kubota engine, features include automatic variable throttle control to minimize fuel consumption, 48 cfm at idle, auto engine-off and restart based on air demand. 800/526-8817; www.vanair.com.

Reelcraft stainless steel hose reel

The hand-crank HS37000 L hose reel from Reelcraft holds 100 feet of 1-inch hose. Made of corrosion-resistant 304L grade stainless steel, the reel, rated at 500 psi, features a stainless steel brake, welded drum and vibration-proof fasteners. Two motor-drive models are available (12-volt DC explosion proof, 115-volt AC). 800/444-3134; www.reelcraft.com.

Coxreels full-flow fluid path  

Model 1175 and 1185 Series reels from Coxreels have a swept outlet riser for maximum full-flow fluid path. Other features include one-piece, all-welded A-frame base designed to handle 1- and 1 1/2-inch I.D. hose. 800/269-7335; www.coxreels.com.